If you use a gas heat generator, you can save quite well on electricity, since the flow rate is very small. It is needed only to create a spark in the burner of burners, and in order to provide a fan.
There are two types of these devices on sale – indirect and direct heating. The highest sales on the market are used by gas heat guns with direct heating technology, since they are not at all expensive, simplicity of design, ease of maintenance and operation. But still it is worth paying attention to the fact that using such a device in a closed space is contraindicated and dangerous, since the gases secreted during combustion are very harmful to human health. So there is no divert of the harmful substance, then its best use, in rooms where there is good ventilation and constant flow of oxygen.
If there is a pipe for exhaust waste, then the heat gun of indirect heating will be tied to one place. The minus of non -transportability does not greatly affect its demand, since it is possible to connect to the gas system. To cut a gas heat gun into a gas pipeline, then you will need a permit to carry out these types of work. But after you collect all the necessary documents and get a work permit, then in return you will receive in return a safe and economical heating system.
Gas heat guns have an excellent advantage – this is the ability to connect gas interchangeable cylinders. With the help of cylinders, the gun can move from one construction site to another. Cylins are refueling with liquefied gas and have a capacity of 21 kg, such a cylinder provides the operation of the gun at the highest level for 10 hours.
Wear -resistant buildings protected from corrosion allow the use of a gun at building facilities with a humidity above the norm.