Everyone knows that before starting construction or repair work, you should take off your male bracelets and things that are not intended for such work. In order to put the brick walls evenly, you need to measure it correctly and put the corners first. The level and strength of the future walls will depend on their sheepskin. In case of any masonry, it is recommended to first lay out the corners of several rows of brick or any other building material. In this case, it is necessary to check the level of the angles by vertically using the level. You can also check the evenness of the angles and diagonally, if you have a fairly long level in stock.
So, after the first rows of the corners are expelled, you can start laying the wall. First, you need to pull the fishing line from one corner to the other along the upper brick of the row, which will be placed as follows (remember that the corners are already laid out in several rows). The fishing line stretched in this way will help you control the correct level of the walls both horizontally and vertically (so that there are no slopes).
With the right process of masonry, we put brick on the lower row smeared with a solution of cement. Do not forget to tap with Kirochka on the applied brick so that he sat on the level you need. An excessive solution from the seam can be removed with a trowel, and the beauty of the outer seam can be formed with a construction embroidery. And do not forget to lay every 5-6 rows of brickwork by building reinforcement or, at least, just thick wire. So your walls will become especially strong!