It is not so difficult to build a greenhouse from polypropylene pipes in your country site as it seems at first glance. Undoubtedly, in any construction work there are technical features, but everything in our life is feasible, unless of course the existing knowledge and accordingly use exclusively high -quality material and tools. Currently, you can put a greenhouse from absolutely any type of pipes, of course, before that, you should seriously consider each construction option in more detail and only after that make your choice in favor of a particular building material.
As a rule, a greenhouse from polypropylene pipes can withstand a large weight and have quite enviable stability on the foundation. For this type of structure, it is possible to use any: stone, strip, or brick type of foundation. The greenhouse, the frame of which is made of polypropylene pipes, will serve its owners with a rather long service and will not be able to break even in the most unpredictable climatic conditions.
Of course, in order for the installation of the pipes to be easier, while pouring or laying the foundation under the greenhouse, it is necessary to install a frame from a polypropylene pipe in it. Naturally, such a greenhouse can be installed on absolutely any type of foundation, but most often many summer residents in order to save a little to save use a classic wooden beam as a basis. As a rule, for a high -quality installation of the greenhouse, you should still stock up with a small amount of reinforcement, in order to give your greenhouse the desired rigidity.
First of all, it is necessary to carefully lay the foundation. Especially in those places where it was planned to let the arcs of the pipes in the future, for this should be deeply driven into the soil, the reinforcement prepared in advance. In addition, it is necessary to carefully ensure that the reinforcement goes deep into the land no less than sixty centimeters, on top of the earth it is necessary to leave about forty centimeters.
After that, the reinforcement sticking out of the ground should be put on a pipe, then carefully fix it with a construction corner or any other clamp, in this case to a wooden foundation. After which the fixed pipe should be placed strictly across.
The final stage will be the coverage of its new greenhouse by finishing material, it can be plastic and classic inexpensive film.