To protect walls in rooms with high humidity, specific technologies and various additional materials should be used. To obtain walls resistant to moisture, you can use a two -component paint on an epoxy basis. Such paint will be an insurmountable barrier for the occurrence of fungi and various microbes, while the surface will be beautiful and attractive. To do this, you need a rapidly drying cement, waterproof paint, a meshist and sponge. You will also need an iron brush, a painting roller or a brush. The technology is quite simple and requires the initial preparation of the wall for painting. An iron brush will help clean the plaque, dirt and dust, then you need to treat the wall with a quick -drying cement that will help avoid damp.
The next stage needs to be started with the preparation of a small amount of paint, by mixing all its components. The paint freezes quickly, so it is better to make a small portion to the sample and work out painting technology. You need to apply paint in several layers, usually two. There is a certain feature that consists in applying each subsequent layer perpendicular to the smears of the previous. All procedures must be carried out in a well -ventilated room, t. To. The components are quite toxic, and even better put on a respirator. It is possible to make additional waterproofing using roller waterproofing materials, which is considered the most reliable and long -term. To prepare walls, it is necessary to use a bitumen emulsion, which in this case acts as a primer. Then you should stick roll waterproofing, which will well protect the walls from moisture. In general, if you need to protect the walls from moisture, this can be done using waterproofing with paint or roll materials.