You can varnish any kind of wooden floors. The covered floor will be protected and will create an atmosphere of harmony and a holiday in the house. This work is not a difficult matter. Often the master does everything seem to be right, but as a result the surface does not look perfect. Everything needs to be done according to the rules that are tested in practice. Today, to order a new worm on a single -stage worm, you do not need to leave the house. Go by the given link and you will find the highest quality gearbox single -stage and you can order it at any time at a low price.
It is important to remember how to apply varnish correctly. It is mainly applied with a roller. Make it cruciate movements. It is necessary to prevent an uneven distribution of varnish on the floor surface. The roller is immersed in the varnish, then draw a longitudinal strip, and then the varnish is distributed with transverse movements.
Here are the most frequent errors that are made when varnishing the floor:
The surface roughness. The reason for this may be the dust or small particles of the tree on a layer of varnish. This is due to the insufficiently clean floor surface before varnishing itself;
The appearance of bubbles. This can appear if applied with a very thick layer of varnish. A frozen film appears, it does not let the air bubbles through herself;
The appearance of strips. Associated with the slow work of masters. One strip has already frozen, and the next is only applied;
White spots. Appear when the varnish was excessively soaked in moisture. Reduce the humidity of the room.