The idea in a car enthusiast who loves to spend time upgrading his car wants to give his car uniqueness. Tuning is generally considered troublesome, but when the result surpasses all expectations, then the time spent on it is no longer a pity. For those who have not yet encountered the installation of the speaker system in the car interior, it is worth clarifying that the midbasses on the front podium are the main part of the entire audio system. In this case, we are interested in the installation of the catwalk in the car of the VAZ 2114 brand.
Task
To play high -quality sound, it is necessary to install the speakers at the right angle. To do this, Macroflex will be sprayed to the entire area of the wooden podium, and then the frame itself is covered with fiberglass.
Materials
The following materials will be needed for the manufacture of the catwalk:
plywood, 8 mm thick, with an area of 0.8 kV.m.
Orlit
Fat cardboard
fiberglass, 0.25 mm thick and 2 kV area.m,
Carbonian
Epoxy glue of the EDP
Polyester putty with fiberglass
sandpaper with a rubber holder
cutter
plasticine
PVA glue
Macrophlex spray
Self -tapping screws
nails
rubber gloves
Safety precautions
Work must be done in thick rubber gloves.
Job
To determine the sizes of the podium, a paper layout is cut out. Then, focusing on the layout, the bottom of the catwalk, a circle for the speaker and the side spacers on which it will be attached is drained from plywood with a cutter. In order for the final assembly of the catwalk it is easier to adjust the parts in size, it is advisable to cut all the components immediately in a double copy. Further, with the help of PVA glue and nails, the podium itself gathers. The internal diameter of the ring must be made with a margin, and let the external be in the end. Pocket can be cut out of plywood, or you can use the existing. It only needs to be unscrewed from the sheathing and file so that it definitely adjacent to the bottom of the catwalk. Pour the entire structure with macroflex. The layer should be thin, otherwise it will dry for a long time.
After drying, we process the outer layer: first we cut off all the excess, and then we emphasize and the podium is almost ready. Now we combine the frame on the base with the entire area. To do this, you need to cut out another additional detail from the organ, the so -called back panel. If this detail is not enough thickness, try to build up with thick cardboard. Attach the resulting “back” to the faner using PVA glue.. Next, using putty and a spatula, you need to give the details the state of a single whole. We are waiting for it until it dries and again emphasize with the sandpaper of medium granularity. Before installing, ready -made podiums can be painted, or covered with vinyl and work can be considered completed.
Result
Despite the fact that the finished equipment of the VAZ 2114 does not imply the presence of a powerful acoustic system, having a sufficient set of tools and fantasies, the Russian person will not graze before the seemingly impossible task. Owners of domestic cars will always find a way out and loud music will be heard from the car interior.