Before laying new ceramic tiles, you need to get rid of the old tile. It is most convenient to dismantle old tiles using a chisel and hammer. It is necessary to remember about the walls, because if they do not clean them from the old putty and paints, then the laid tile will not last four months. The prepared wall must be checked using the level. Since if the surface is a curve, you will need to try. The easiest way, and more reliable, to align the walls with a gypsum mixture, and after that they need to be moistened with water or a primer. Firstly, after that, the tile is more likely to grasp, and secondly, it will not be necessary to spend a huge amount of glue. The primer also protects the surface of the bathroom from the fungus and mold. It is best to apply a primer with a brush, because a roller would spend more soil. If you are looking for high -quality fittings, we advise you to follow the link given.
Lay the tile using special tile glue. Its degree of reliability is the same as that of cement, but it is much easier to interfere with it. To mix the glue quickly and without problems, the powder must be poured into the water, and not vice versa. Glue should be applied to the tile with a thin layer using a gear spatula. It is a toothed spatula that will help to apply the same amount of glue to all tiles.
By laying the tiles, remember that between each of them there should be a distance of two millimeters. Special crosses will help us in this, or matches.