If the tile suddenly cracked in the bathroom or kitchen, you do not need to despair, thinking that now you will have to completely replace the tiles, or call the master, since the tile can always be replaced independently for half an hour, without resorting to overhaul.
To do this, you need to perform the following operations:
1. It is necessary to remove the total voltage from the tile, so the first thing you need to drill through the through holes, thereby deepening the crack. This operation will accelerate and facilitate the process;
2. The seams of the tiles must be cleaned from the solution using a screwdriver or spatula;
3. Then, with the help of a chisel and a hammer, a cracked tile is removed, this operation must be done carefully so as not to damage the standing tiles nearby, while it is better to put the fabric on the floor so that the fragments do not damage it;
4. After the tile is removed, it is necessary to clean the remaining solution;
5. We fasten the tiles. You can do this in two ways. With the help of glue (for this you must first level the surface on which it will glue, using plaster, and after the solution dries the tile, wiping excess glue, sponge or a damp cloth). With the help of cement (first you need to make small holes on the back of the tiles in order for the tile to fall evenly, and then remove the excess solution after fastening);
6. Leve tiles with a wooden beam;
7. Then let the glue or cement dry (depending on what material was mounted) and fill the seams around the tile with putty, level it again, and wipe the repair site with a wet sponge.
After this operation, repair work on the installation of tiles can be considered complete. After installation, the just installed tile should not differ from the previously installed tile.