High -quality cement, skillful hands – this is what is necessary to start construction, namely the creation of the foundation. High -quality cement mortar can be prepared independently, or can be ordered at the factory. It is on the quality of the manufacture of a cement mortar that the foundation strength depends to a greater extent. So, a solution of concrete for the foundation is not recommended to be poured into the formwork immediately, the mixture should be laid evenly, in parts, along the entire perimeter of the formwork. The peculiarity of pouring the foundation takes a lot of time, since a lot of time takes the process of drying. If it is planned to prepare a cement mortar on your own, then you should prepare a place for a mixer machine, devices on the site. When pouring the foundation, the solution must not be hardened, if the process has already begun, then you can add water and mix everything well. When pouring the solution, it is recommended to thoroughly compact the layers so that all the air comes out, which worsens concrete adhesion. In order to fill the foundation, one should not forget about the level. To do this, it is recommended to pull the fishing line. The surface is aligned with the surface of the filled layer and covered with a film.
